IS3900 SERIES
Illuminated Shaft, One Inch Diameter Body
IS3900 SERIES
Illuminated Shaft, One Inch Diameter Body
Continuous (Non-Switching) Current Capacity |
5 Amps
|
Switching Current Capacity 28 VDC Resistive |
1 Amps
|
Switching Current Capacity 115 VAC Resistive |
1 Amps
|
Switching Current Capacity 28 VDC Inductive (2.8 H.) |
0.5 Amps
|
Low Level Capable | YES |
Switching Life |
25,000 cycles
|
Weight |
15 grams
|
Contact Surfaces | Gold Plated |
Vibration Tested | YES |
High Impact Shock Tested | YES |
Moisture Resistant | YES |
Salt Spray Resistant | YES |
Explosion Proof | YES |
RFI/EMI Tested | YES |
Shaft Seal | Available |
Panel Seal | Available |
LED SPECIFICATIONS
Hewlett Packard P/N | HLMA-KH00 |
Current | 20 mA |
Voltage | 2.4 VDC |
Brightness | 200 MCD Typ. (35 min) |
Wave Length | 615 mm |
Degrees | Max. Positions | Poles Available |
30° | 12 | 1, 2, 3, 4 or 6 |
36° | 10 | 1 or 2 |
45° | 8 | 1, 2 or 4 |
60° | 6 | 1, 2 or 3 |
90° | 4 | 1 or 2 |
Cole Instrument Corporation is proud to offer a rotary switch with illumination through the end of the shaft front. This can be used to light up any part of the rotary switch's knob. An LED (Light Emitting Diode) or an incandescent lamp is on the back end of the switch body, and a light pipe or fiber optics brings the concentrated light through the switch to the shaft front.
The Series IS3900 switch offers maximum and optimum visibility at sunlight with minimum power levels. And at night, there is zero light leakage through the length of the switch. Light can meet most chromaticity or intensity requirements. The light can be an LED or a T1 incandescent lamp.
The switch features good heat sinking capabilities, and delivers up to twice the light intensity of units at equivalent power levels. On light failure, reclamping can be done by the customer.
Cole can provide the replacement assembly. This switch can be used in airborne, shipboard, and submarine panel control displays and meets the brightness requirements of high altitude aircraft, as well as the MIL-S-901C shock requirement for submarines and ships.
QUICK LINKS
The Innovative Switch Company
P.O. Box 25063
Santa Ana, CA 92799-5063
ISO 9001:2015
AS9100:2016 Rev. D
Certified
Email: Cette adresse e-mail est protégée contre les robots spammeurs. Vous devez activer le JavaScript pour la visualiser.
Tel: +714-556-3100